Free tool
Bathroom tile calculator
Work out floor and wall tile area in square feet, add the right waste allowance and get the number of tiles and boxes to order.
You need
12 boxes
92 tiles, covering 183.7 sq ft with 10% waste
- Floor
- 40 sq ft
- Walls
- 127 sq ft
- Total before waste
- 167 sq ft
How to measure
- Floor: measure the longest length and width, including under the vanity if the tile runs beneath it.
- Walls: add up the length of every wall you'll tile, then the height you'll tile to (full height, or the top of the shower).
- Openings: take off doors and windows inside the tiled area. A standard door is about 17 sq ft.
- Boxes: use the coverage printed on the box, not the tile count, as boxes of large tiles often hold an odd area.
How much waste to allow
| Layout | Add |
|---|---|
| Straight lay, simple room | 10% |
| Lots of cuts, niches, small rooms | 12 to 15% |
| Diagonal | 15% |
| Herringbone or chevron | 15 to 20% |
| Large format (over 24 in / 600 mm) | 10 to 15% |
Order every box from the same batch, and keep a few spare tiles for the homeowner in case of a repair later.
In Bathroom Passport
Measurements carry into the quote
Questions
Good to know.
How many extra tiles should I order?
Allow 10% for a straight lay in a simple room, 15% for diagonal layouts or rooms with lots of cuts, and up to 20% for herringbone. It is cheaper to return a spare box than to find a matching batch later.
Do I measure in feet or tiles?
Measure the area in square feet, then use the coverage on the box. Counting tiles alone ignores grout joints and cuts.
Should I take off the area behind the vanity or the bath?
Only if you will not tile there. Many fitters tile the floor under a vanity on legs, and leave out the area under a fitted bath.
Start today
Give every bathroom the finish it deserves.
Try everything free for 14 days, no card needed. Set up your first bathroom renovation in minutes.
Prefer a walkthrough? Book a demo